Original file

Škoda Octavia 3 1.0 TSI Bosch MED17.1.27 04C907309BB / 10SW035060

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Škoda Octavia 3 1.0 TSI, hardware number 04C907309BB and software number 10SW035060, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Octavia 3 1.0 TSI1.0 petrol 110.0PS / 80.9kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BB
Software number
10SW035060
Software / calibration
04C906025L

Technical data

Vehicle
BrandŠkoda
Car modelOctavia 3 1.0 TSI
Engine1.0 petrol 110.0PS / 80.9kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BB
Software number10SW035060
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key794c3e8287c764c7
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW035060Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BBOffset in the file: 0x3C6B02
Software / calibration04C906025L · version 6198Offset in the file: 0x3C6B1C
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33Q51///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BB and software number 10SW035060. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
ŠkodaFlash4,096.00 KB€15Add to cart

All reads of 04C907309BB / 10SW035060

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BB04C907309BBVolkswagen Golf, Volkswagen Ibiza, Volkswagen A3
04C907309BB10SW025030Seat
04C907309BB10SW025031Seat Arona
04C907309BB10SW035059Volkswagen Polo, Volkswagen Ibiza, Seat
04C907309BB10SW035120Škoda Rapid
04C907309BB10SW035121Seat Ateca
04C907309BB10SW035123Volkswagen T-Cross, Volkswagen Arona, Seat
04C907309BB10SW035690Audi A3

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page