Original file

Seat Arona Bosch MED17.1.27 04C907309BC / 10SW044154

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Seat Arona, hardware number 04C907309BC and software number 10SW044154, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Arona1.0 95PS
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BC
Software number
10SW044154
Software / calibration
04C906025AB

Technical data

Vehicle
BrandSeat
Car modelArona
Engine1.0 95PS
Power95PS / 69.9kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BC
Software number10SW044154
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key48b62b9c23977dbc
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW044154Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309BCOffset in the file: 0x3CCCAA
Software / calibration04C906025AB · version 6893Offset in the file: 0x3CCCC4
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V39C001_M33Q72///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BC and software number 10SW044154. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BB10SW099364Volkswagen
04C907309BC10SW023574Seat
04C907309BC10SW030156Seat Ibiza
04C907309BC10SW037568Seat Ibiza
04C907309BC10SW075724Škoda
04C907309BC10SW092381Volkswagen
04C907309BP048510Volkswagen A1 1.0 TSI/TFSI, Volkswagen no Serie 1.0 TSI, Volkswagen Polo 1.0 TSI
04C907309BP048538Audi A1 1.0 TSI

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page