Original file

Volkswagen Polo 1.0 TSI Bosch MED17.1.27 04C907309BP / 048510

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Volkswagen Polo 1.0 TSI, hardware number 04C907309BP and software number 048510, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo 1.0 TSI1.0 petrol 95.2PS / 70.0kW
Control unit
Bosch MED17.1.27
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04C907309BP
Software number
048510
Bosch part / software
10SW048510
Software / calibration
04C906025AN

Technical data

Vehicle
BrandVolkswagen
Car modelPolo 1.0 TSI
Engine1.0 petrol 95.2PS / 70.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number048510
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key783a0bd51e676952
Identification read from the file
ECU nameMED17.1.27
Read typeCalibration only (data set)
Bosch part / software10SW048510Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x3C9122
Software / calibration04C906025AN · version 7055Offset in the file: 0x3C913C
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33R40///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 048510. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen no Serie 1.0 TSIFlash4,096.00 KB€15Add to cart
Audi A1 1.0 TSI/TFSIFlash4,096.00 KB€15Add to cart

All reads of 04C907309BP / 048510

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BC10SW037568Seat Ibiza
04C907309BC10SW044154Seat Arona
04C907309BC10SW075724Škoda
04C907309BC10SW092381Volkswagen
04C907309BP048538Audi A1 1.0 TSI
04C907309BP048630Audi Polo 1.0 TSI, Audi A1 1.0 TSI, Audi A1 1.0 TSI/TFSI
04C907309BP048678Škoda Scala 1.0 TSI, Škoda Arona 1.0 TSI, Škoda A1 1.0 TSI
04C907309BP049922Audi A3 30 1.0 TFSI 6MT - 116hp, Audi Golf 7 1.0 TSI, Volkswagen

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page