Original file

Škoda Fabia 3 1.0 TSI Bosch MED17.1.27 04C907309BP / 051958

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Škoda Fabia 3 1.0 TSI, hardware number 04C907309BP and software number 051958, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Fabia 3 1.0 TSI1.0 petrol 110.1PS / 81.0kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BP
Software number
051958
Bosch part / software
10SW051958
Software / calibration
04C906025CP

Technical data

Vehicle
BrandŠkoda
Car modelFabia 3 1.0 TSI
Engine1.0 petrol 110.1PS / 81.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number051958
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9e7b614e606dc3b5
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW051958Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x3C910A
Software / calibration04C906025CP · version 0211Offset in the file: 0x3C9124
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33R50///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 051958. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP048678Škoda Scala 1.0 TSI, Škoda Arona 1.0 TSI, Škoda A1 1.0 TSI
04C907309BP049922Audi A3 30 1.0 TFSI 6MT - 116hp, Audi Golf 7 1.0 TSI, Volkswagen
04C907309BP04C906025BAVolkswagen Golf 7
04C907309BP04C907309BPŠkoda Fabia, Škoda Polo, Škoda Arona
04C907309BP068803Audi A1 1.0 TSI/TFSI
04C907309BP10SW048510Volkswagen Ibiza, Volkswagen Polo, Seat
04C907309BP10SW048538Volkswagen T-Cross, Volkswagen Karoq, Volkswagen Q2
04C907309BP10SW048630Seat Ibiza, Seat T-Cross, Volkswagen

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page