Original file

Audi A1 1.0 TSI/TFSI Bosch MED17.1.27 04C907309BP / 068803

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Audi A1 1.0 TSI/TFSI, hardware number 04C907309BP and software number 068803, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A1 1.0 TSI/TFSI1.0 petrol 115.6PS / 85.0kW
Control unit
Bosch MED17.1.27
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04C907309BP
Software number
068803
Bosch part / software
10SW068803
Software / calibration
04C906025AL

Technical data

Vehicle
BrandAudi
Car modelA1 1.0 TSI/TFSI
Engine1.0 petrol 115.6PS / 85.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number068803
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key55a06277e3a2c5d0
Identification read from the file
ECU nameMED17.1.27
Read typeCalibration only (data set)
Bosch part / software10SW068803Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x3C90F6
Software / calibration04C906025AL · version 7719Offset in the file: 0x3C9110
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33R51///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 068803. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP049922Audi A3 30 1.0 TFSI 6MT - 116hp, Audi Golf 7 1.0 TSI, Volkswagen
04C907309BP04C906025BAVolkswagen Golf 7
04C907309BP04C907309BPŠkoda Fabia, Škoda Polo, Škoda Arona
04C907309BP051958Škoda Fabia 3 1.0 TSI
04C907309BP10SW048510Volkswagen Ibiza, Volkswagen Polo, Seat
04C907309BP10SW048538Volkswagen T-Cross, Volkswagen Karoq, Volkswagen Q2
04C907309BP10SW048630Seat Ibiza, Seat T-Cross, Volkswagen
04C907309BP10SW048678Seat Arona, Seat T-Cross, Volkswagen

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page