Original file

Audi Q2 Bosch MED17.1.27 04C907309BP / 10SW048538

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Audi Q2, hardware number 04C907309BP and software number 10SW048538, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q21.0 petrol · 115.6PS / 85.0kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BP
Software number
10SW048538
Software / calibration
04C906025BC

Technical data

Vehicle
BrandAudi
Car modelQ2
Engine1.0 petrol
Power115.6PS / 85.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number10SW048538
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi Q2 1.0 TSI 7060
File key8a9d117d1861eb82
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW048538Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x3C9122
Software / calibration04C906025BC · version 7060Offset in the file: 0x3C913C
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33R40///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 10SW048538. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Škoda KaroqFlash4,096.00 KB€15Add to cart
Volkswagen T-CrossFlash4,352.00 KB€15Add to cart

All reads of 04C907309BP / 10SW048538

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP04C907309BPŠkoda Fabia, Škoda Polo, Škoda Arona
04C907309BP051958Škoda Fabia 3 1.0 TSI
04C907309BP068803Audi A1 1.0 TSI/TFSI
04C907309BP10SW048510Volkswagen Ibiza, Volkswagen Polo, Seat
04C907309BP10SW048630Seat Ibiza, Seat T-Cross, Volkswagen
04C907309BP10SW048678Seat Arona, Seat T-Cross, Volkswagen
04C907309BP10SW048692Škoda Fabia 3 1.0 TSI
04C907309BP10SW049293

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page