Original file

Škoda Fabia 3 Bosch MED17.1.27 04C907309BP / 10SW051958

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Škoda Fabia 3, hardware number 04C907309BP and software number 10SW051958, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Fabia 31.0 petrol 110PS
Control unit
Bosch MED17.1.27
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04C907309BP
Software number
10SW051958
Software / calibration
04C906025CP

Technical data

Vehicle
BrandŠkoda
Car modelFabia 3
Engine1.0 petrol 110PS
Power110.0PS / 80.9kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number10SW051958
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key765a7b60307b978e
Identification read from the file
ECU nameMED17.1.27
Read typeCalibration only (data set)
Bosch part / software10SW051958Offset in the file: 0x18001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x1C910A
Software / calibration04C906025CP · version 0211Offset in the file: 0x1C9124
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33R50///Offset in the file: 0x1FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 10SW051958. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP10SW048678Seat Arona, Seat T-Cross, Volkswagen
04C907309BP10SW048692Škoda Fabia 3 1.0 TSI
04C907309BP10SW049293
04C907309BP10SW049922Volkswagen Golf
04C907309BP10SW065005Škoda Fabia, Škoda Fabia 3
04C907309BP10SW068802Seat
04C907309BP10SW068803Seat
04C907309BP10SW068805Škoda Scala, Seat

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page