Original file

Seat Bosch MED17.1.27 04C907309BP / 10SW068803

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Seat, hardware number 04C907309BP and software number 10SW068803, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat1.0 petrol 115PS
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BP
Software number
10SW068803
Software / calibration
04C906025AL

Technical data

Vehicle
BrandSeat
Engine1.0 petrol 115PS
Power115.6PS / 85.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number10SW068803
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyda680b4309933906
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW068803Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x3C90F6
Software / calibration04C906025AL · version 7719Offset in the file: 0x3C9110
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33R51///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 10SW068803. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP10SW049922Volkswagen Golf
04C907309BP10SW051958Škoda Fabia 3
04C907309BP10SW065005Škoda Fabia, Škoda Fabia 3
04C907309BP10SW068802Seat
04C907309BP10SW068805Škoda Scala, Seat
04C907309BP10SW068812Škoda Fabia, Seat
04C907309BP10SW068825Volkswagen Golf, Seat
04C907309BP10SW070395Škoda Fabia

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page