Original file

Škoda Fabia Bosch MED17.1.27 04C907309BP / 10SW070395

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Škoda Fabia, hardware number 04C907309BP and software number 10SW070395, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Fabia1.0 petrol 95PS
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309BP
Software number
10SW070395
Software / calibration
04C906025DC

Technical data

Vehicle
BrandŠkoda
Car modelFabia
Engine1.0 petrol 95PS
Power95.2PS / 70.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BP
Software number10SW070395
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycbb975f95eb7dadb
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW070395Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309BPOffset in the file: 0x3C9072
Software / calibration04C906025DC · version 1199Offset in the file: 0x3C908C
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33S42///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BP and software number 10SW070395. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP10SW068803Seat
04C907309BP10SW068805Škoda Scala, Seat
04C907309BP10SW068812Škoda Fabia, Seat
04C907309BP10SW068825Volkswagen Golf, Seat
04C907309BP10SW083370Volkswagen
04C907309BP10SW083382Volkswagen
04C907309BP10SW091215Škoda
04C907309BP10SW091281Škoda

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page