Original file

Volkswagen Caddy Bosch MED17.1.27 04C907309BT / 04C907309BT

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Volkswagen Caddy, hardware number 04C907309BT and software number 04C907309BT, 4,352.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Caddy1.0 petrol · 102.0PS / 75.0kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,352.00 KB · Flash
Hardware number
04C907309BT
Software number
04C907309BT
Bosch part / software
10SW048377
Software / calibration
04C906025AG

Technical data

Vehicle
BrandVolkswagen
Car modelCaddy
Engine1.0 petrol
Power102.0PS / 75.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309BT
Software number04C907309BT
File
File typeOriginal flash read
File size4,352.00 KB (4,456,448 bytes)
File keyb8ee021829f3f1fb
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW048377Offset in the file: 0x38001A
Vehicle maker's hardware number04C907309BTOffset in the file: 0x3C8656
Software / calibration04C906025AG · version 7052Offset in the file: 0x3C8670
Bosch project identifier (EPK)38/1/MED17/3///D17127V32C001_M33R40///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BT and software number 04C907309BT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen UP!Flash4,352.00 KB€15Add to cart

All reads of 04C907309BT / 04C907309BT

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BP10SW095237Volkswagen
04C907309BP10SW095710Volkswagen
04C907309BT048377Volkswagen Caddy 1.0 TSI
04C907309BT04C906025AGAudi A1
04C907309BT10SW054179Volkswagen UP!
04C907309BT10SW065010Volkswagen UP!
04C907309BT10SW071436Volkswagen UP!
04C907309BT10SW096008Volkswagen UP!

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page