Original file

Škoda Bosch MED17.1.27 04C907309CF / 10SW078576

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Škoda, hardware number 04C907309CF and software number 10SW078576, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škodadiesel
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04C907309CF
Software number
10SW078576
Software / calibration
04C906025CD

Technical data

Vehicle
BrandŠkoda
Enginediesel
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04C907309CF
Software number10SW078576
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb1a6f52e36ba9e15
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW078576Offset in the file: 0x02001A
Vehicle maker's hardware number04C907309CFOffset in the file: 0x3C9562
Software / calibration04C906025CD · version 1648Offset in the file: 0x3C957C
Internal build stringMED17 CB.09.07.02Offset in the file: 0x20FDF8
Bosch project identifier (EPK)38/1/MED17/3///D17127V31C001_M33T51///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309CF and software number 10SW078576. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04C907309BT10SW054179Volkswagen UP!
04C907309BT10SW065010Volkswagen UP!
04C907309BT10SW071436Volkswagen UP!
04C907309BT10SW096008Volkswagen UP!
04C907309CF10SW087635Volkswagen
04C907309CF10SW087636Volkswagen
04C907309CF10SW089065Volkswagen
04C907309CF10SW089104Volkswagen

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page