Original file

Audi A1 1.4 TSI/TFSI Bosch MED17.1.27 04E907309CG / 052187

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Audi A1 1.4 TSI/TFSI, hardware number 04E907309CG and software number 052187, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A1 1.4 TSI/TFSI1.4 petrol 0.0PS / 0.0kW
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309CG
Software number
052187
Bosch part / software
10SW052187
Software / calibration
04E906024G

Technical data

Vehicle
BrandAudi
Car modelA1 1.4 TSI/TFSI
Engine1.4 petrol 0.0PS / 0.0kW
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04E907309CG
Software number052187
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key57110a4e8d1fc1dd
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW052187Offset in the file: 0x38001A
Vehicle maker's hardware number04E907309CGOffset in the file: 0x3EE84E
Software / calibration04E906024G · version 9819Offset in the file: 0x3EE868
Bosch project identifier (EPK)38/1/MED17/3///D17127V08C000_N20D10///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CG and software number 052187. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04E907309BT10SW087413Volkswagen
04E907309BT10SW087414Volkswagen
04E907309BT10SW087416Volkswagen
04E907309CG04E907309CGVolkswagen Golf, Volkswagen Passat, Volkswagen Q3
04E907309CG052591Audi A1 1.4 TSI/TFSI
04E907309CG10SW052591Škoda Superb 3, Škoda Octavia 2
04E907309CG10SW074420Volkswagen Arteon
04E907309CG10SW077626Škoda

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page