Original file

Volkswagen Bosch MED17.1.27 04E907309EN / 10SW083003

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Volkswagen, hardware number 04E907309EN and software number 10SW083003, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
VolkswagenDLSA
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309EN
Software number
10SW083003
Software / calibration
04E906025DC

Technical data

Vehicle
BrandVolkswagen
EngineDLSA
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04E907309EN
Software number10SW083003
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key55b699f8b57cde6a
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW083003Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309ENOffset in the file: 0x3DF8E2
Software / calibration04E906025DC · version 1953Offset in the file: 0x3DF8FC
Internal build stringMED17 CB.09.07.02Offset in the file: 0x20FDF8
Bosch project identifier (EPK)38/1/MED17/3///D17127V13C001_M20D90///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309EN and software number 10SW083003. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page