Original file

Porsche Cayenne S Hybrid Bosch MED17.1.6 06E906023AG / 10SW005972

An original (stock) flash read of the Bosch MED17.1.6 control unit, fitted in Porsche Cayenne S Hybrid, hardware number 06E906023AG and software number 10SW005972, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Cayenne S Hybrid3.0 petrol · 416.0PS / 306.0kW
Control unit
Bosch MED17.1.6
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
06E906023AG
Software number
10SW005972

Technical data

Vehicle
BrandPorsche
Car modelCayenne S Hybrid
Engine3.0 petrol
Power416.0PS / 306.0kW
Control unit
Control unitBosch MED17.1.6
ECU makerBosch
Hardware number06E906023AG
Software number10SW005972
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb8e34683fb74b4a5
Identification read from the file
ECU nameMED17.1.6
Read typeFull read (boot area included)
Bosch part / software10SW005972Offset in the file: 0x3FC01A
Software / calibration06E906023AG · version 3112Offset in the file: 0x3D08E6
Bosch project identifier (EPK)54/1/MED17/3/D1716V12C000//D1716V13C000_M16B10/Dst00//Offset in the file: 0x3FBF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06E906023AG and software number 10SW005972. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.6

HardwareSoftwareVehicles
06E906023AG1037544232Porsche Cayenne S Hybrid, Porsche Cayenne Hybrid, Porsche Cayenne
06E906023AG1037549104Porsche Cayenne Hybrid, Porsche Cayenne S Hybrid
06E906023AG1037555904Porsche Cayenne
06E906023AG10SW005682Porsche Cayenne S Hybrid
06E906023AG10SW011151Porsche Cayenne S Hybrid
06E906023AG10SW011248Porsche Cayenne S Hybrid
06E906023AG10SW011250Porsche Cayenne S Hybrid
06E906023AG10SW011287Porsche Cayenne S

Bosch MED17.1.6 original files

The Bosch MED17.1.6 unit page