Original file

Audi A8 Bosch MED17.1.6 07P906023B / 1037522199

An original (stock) flash read of the Bosch MED17.1.6 control unit, fitted in Audi A8, hardware number 07P906023B and software number 1037522199, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A86.3 petrol
Control unit
Bosch MED17.1.6
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07P906023B
Software number
1037522199
Vehicle maker's hardware number
07P906023

Technical data

Vehicle
BrandAudi
Car modelA8
Engine6.3 petrol
Control unit
Control unitBosch MED17.1.6
ECU makerBosch
Hardware number07P906023B
Software number1037522199
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key30e12c2c3a54a46b
Identification read from the file
ECU nameMED17.1.6
Read typeOBD read (no boot area)
Bosch part / software1037522199Offset in the file: 0x02001A
Vehicle maker's hardware number07P906023Offset in the file: 0x3AEC28
Software / calibration07P906023B · version 9525Offset in the file: 0x3AEC42
Internal build stringMED17 CB.03.09.05Offset in the file: 0x00DF5F
Bosch project identifier (EPK)45/1/MED17/3/D171651L//D171651L_M14I3/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07P906023B and software number 1037522199. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.6

HardwareSoftwareVehicles
07P90602310SW005925Audi A8
07P906023A1037516479Audi A8
07P906023A1037520971Audi A8 6.3 FSI W12 Quattro, Audi A8
07P906023A10SW005607Audi A8
07P906023B10SW005799Audi A8
07P906023C10SW005836Audi A8
07P906023D1037522029Audi A8
07P906023D10SW005644Audi A8

Bosch MED17.1.6 original files

The Bosch MED17.1.6 unit page