Original file

Audi Bosch MED17.1.61 07P906027A / 1037552876

An original (stock) flash read of the Bosch MED17.1.61 control unit, fitted in Audi, hardware number 07P906027A and software number 1037552876, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audidiesel
Control unit
Bosch MED17.1.61
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07P906027A
Software number
1037552876
Vehicle maker's hardware number
07P907309

Technical data

Vehicle
BrandAudi
Enginediesel
Control unit
Control unitBosch MED17.1.61
ECU makerBosch
Hardware number07P906027A
Software number1037552876
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybb81c8a0cd60c16e
Identification read from the file
ECU nameMED17.1.61
Read typeOBD read (no boot area)
Bosch part / software1037552876Offset in the file: 0x02001A
Vehicle maker's hardware number07P907309Offset in the file: 0x3BC334
Software / calibration07P906027A · version 8423Offset in the file: 0x3BC34E
Internal build stringMED17 CB.07.07.00Offset in the file: 0x00F3D4
Bosch project identifier (EPK)38/1/MED17/1///D17161V01C000_NY16C1///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.61 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07P906027A and software number 1037552876. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.61

Bosch MED17.1.61 original files