Original file

Bosch MED17.1.62 0260560000 / 10SW026056

An original (stock) flash read of the Bosch MED17.1.62 control unit, hardware number 0260560000 and software number 10SW026056, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0260560000
Software number
10SW026056
Vehicle maker's hardware number
03H907309L
Software / calibration
03H906026A

Technical data

Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number0260560000
Software number10SW026056
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key121cf0a88dfd7641
Identification read from the file
ECU nameMED17.1.61
Read typeFull read (boot area included)
Bosch part / software10SW026056Offset in the file: 0x02001A
Vehicle maker's hardware number03H907309LOffset in the file: 0x3C7FEC
Software / calibration03H906026A · version 5284Offset in the file: 0x3C8006
Internal build stringMED17 CB.09.07.00Offset in the file: 0x20FD38
Bosch project identifier (EPK)46/1/MED17/3/MED17161//D17162V03C000_M17Q35///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0260560000 and software number 10SW026056. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
026012000007K907309EAudi RS3, Audi TT RS
026014000007K907309EAudi RS3
03H906026AA10SW041813Volkswagen
03H906026AA10SW079090Volkswagen
03H906026AC10SW062896Volkswagen
03H906026AE10SW062897Volkswagen
03H906026AF10SW068544Volkswagen
03H906026AF10SW078899Volkswagen

Bosch MED17.1.62 original files