Original file

Audi RS3 2.5 TFSI Bosch MED17.1.62 07K907309E / 040570

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Audi RS3 2.5 TFSI, hardware number 07K907309E and software number 040570, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS3 2.5 TFSI2.5 petrol 399.7PS / 294.0kW
Control unit
Bosch MED17.1.62
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
07K907309E
Software number
040570
Bosch part / software
10SW040570
Software / calibration
8V0907404A

Technical data

Vehicle
BrandAudi
Car modelRS3 2.5 TFSI
Engine2.5 petrol 399.7PS / 294.0kW
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07K907309E
Software number040570
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycc618bf47cc42cc1
Identification read from the file
ECU nameMED17.1.62
Read typeCalibration only (data set)
Bosch part / software10SW040570Offset in the file: 0x38001A
Vehicle maker's hardware number07K907309EOffset in the file: 0x3E0E52
Software / calibration8V0907404A · version 0007Offset in the file: 0x3E0E6C
Bosch project identifier (EPK)39/1/MED17/5///D17162A01C000_MY17H10///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309E and software number 040570. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309E023207Audi RS3 2.5 TFSI
07K907309E025951Audi RS3 2.5 TFSI, Audi TT RS Coupe 2.5 TFSI quattro 7AT - 400PS, Audi TT RS 2.5 TFSI V5
07K907309E026386Audi RS3 2.5 TFSI, Audi A3 2.5 TFSI
07K907309E036660Audi RS3 2.5 TFSI
07K907309E040883Audi RS3 2.5 TFSI, Audi RS3 Sportback 2.5 TFSI quattro 7AT - 400hp
07K907309E050147Audi RS3 2.5 TFSI
07K907309E073535Audi RS3 2.5 TFSI
07K907309E07K907309EAudi RS3

Bosch MED17.1.62 original files