Original file

Audi RS3 Bosch MED17.1.62 07K907309E / 8S0907404E

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Audi RS3, hardware number 07K907309E and software number 8S0907404E, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS32.5 petrol · 400PS / 294.2kW
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309E
Software number
8S0907404E
Bosch part / software
10SW025951

Technical data

Vehicle
BrandAudi
Car modelRS3
Engine2.5 petrol
Power400PS / 294.2kW
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07K907309E
Software number8S0907404E
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2e8cdec88ae3a71f
Identification read from the file
ECU nameMED17.1.62
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW025951Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309EOffset in the file: 0x3E0E52
Software / calibration8S0907404E · version 0003Offset in the file: 0x3E0E6C
Internal build stringMED17 CB.09.07.00Offset in the file: 0x20FD38
Bosch project identifier (EPK)38/1/MED17/5///D17162A01C000_MY17H7///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309E and software number 8S0907404E. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi TT RSFlash4,096.00 KB€15Add to cart
Audi TT RSFlash4,352.00 KB€15Add to cart

All reads of 07K907309E / 8S0907404E

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309E10SW049112Audi RS3
07K907309E10SW082124Audi RS3
07K907309E10SW084543Audi RS3
07K907309E8S0907404AAudi RS3, Audi TT-RS
07K907309E8V0907404AAudi RS3
07K907309E8V0907404EAudi RS3
07K907309F044522Audi RS3 2.5 TFSI, Audi RS3 Sportback 2.5 TFSI quattro 7AT, Audi RS3 Sportback 2.5 TFSI quattro 7AT - 367hp
07K907309F049335Audi RS3 2.5 TFSI, Audi TT3 RS 2.5 TFSI, Audi RS3

Bosch MED17.1.62 original files