Original file

Audi Q3 Bosch MED17.1.62 07K907309F / 052832

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Audi Q3, hardware number 07K907309F and software number 052832, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3petrol 0.0PS / 0.0kW
Control unit
Bosch MED17.1.62
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
07K907309F
Software number
052832
Bosch part / software
10SW052832
Software / calibration
83A907404

Technical data

Vehicle
BrandAudi
Car modelQ3
Enginepetrol 0.0PS / 0.0kW
Displacement2.5
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07K907309F
Software number052832
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key64808a1673dc5f09
Identification read from the file
ECU nameMED17.1.62
Read typeCalibration only (data set)
Bosch part / software10SW052832Offset in the file: 0x18001A
Vehicle maker's hardware number07K907309FOffset in the file: 0x1E5BD2
Software / calibration83A907404 · version 0002Offset in the file: 0x1E5BEC
Bosch project identifier (EPK)38/1/MED17/5///D17162A02C000_MY20F5///Offset in the file: 0x1FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309F and software number 052832. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS3 2.5 TFSIFlash4,096.00 KB€15Add to cart
Audi RS3 Sportback 2.5 TFSI quattro 7AT - 367hpFlash4,096.00 KB€15Add to cart
Audi Q3 RS 2.5T-FSI 400HP OPFFlash4,096.00 KB€15Add to cart
Audi RSQ3 2.5 TFSIFlash4,096.00 KB€15Add to cart

All reads of 07K907309F / 052832

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309E8V0907404AAudi RS3
07K907309E8V0907404EAudi RS3
07K907309F044522Audi RS3 2.5 TFSI, Audi RS3 Sportback 2.5 TFSI quattro 7AT, Audi RS3 Sportback 2.5 TFSI quattro 7AT - 367hp
07K907309F049335Audi RS3 2.5 TFSI, Audi TT3 RS 2.5 TFSI, Audi RS3
07K907309F065830Audi TT RS 2.5 TFSI
07K907309F065835Audi RS Q3 2.5 TFSI
07K907309F07K907309FAudi RS3, Audi RSQ3, Audi TT RS
07K907309F10SW044522Audi RS3

Bosch MED17.1.62 original files