Original file

Audi RS3 Bosch MED17.1.62 07K907309F / 10SW044522

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Audi RS3, hardware number 07K907309F and software number 10SW044522, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS32.5 petrol 400PS
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309F
Software number
10SW044522
Software / calibration
8V0907404H

Technical data

Vehicle
BrandAudi
Car modelRS3
Engine2.5 petrol 400PS
Power400PS / 294.2kW
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07K907309F
Software number10SW044522
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye0f0bbd65e864167
Identification read from the file
ECU nameMED17.1.62
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW044522Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309FOffset in the file: 0x3E4E5E
Software / calibration8V0907404H · version 0002Offset in the file: 0x3E4E78
Internal build stringMED17 CB.09.07.00Offset in the file: 0x20FD38
Bosch project identifier (EPK)38/1/MED17/5///D17162A02C000_MY19E5///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309F and software number 10SW044522. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash2,048.00 KB€15Add to cart
Audi RS3Flash2,048.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart
AudiFlash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart
Audi RS3Flash4,096.00 KB€15Add to cart

All reads of 07K907309F / 10SW044522

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309F052832Audi Q3 RS 2.5T-FSI 400HP OPF, Audi RS3 2.5 TFSI, Audi RSQ3 2.5 TFSI
07K907309F065830Audi TT RS 2.5 TFSI
07K907309F065835Audi RS Q3 2.5 TFSI
07K907309F07K907309FAudi RS3, Audi RSQ3, Audi TT RS
07K907309F10SW049335Audi RS3
07K907309F10SW049336Audi TT RS Coupe, Audi TT, Audi Salvo
07K907309F10SW052832Audi RSQ3, Audi RS3 Sportback
07K907309F10SW065835Audi RSQ3

Bosch MED17.1.62 original files