Original file

Seat Exeo Bosch MED17.1 0261S06011 / 1037509850

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Seat Exeo, hardware number 0261S06011 and software number 1037509850, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Exeo2.0 petrol 211PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S06011
Software number
1037509850
Vehicle maker's hardware number
3R0907115F

Technical data

Vehicle
BrandSeat
Car modelExeo
Engine2.0 petrol 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number0261S06011
Software number1037509850
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye1af7ff643927748
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
ProcessorTC1796
Bosch part / software0261S06011 / 1037509850Offset in the file: 0x06A8F2 / 0x08001A
Vehicle maker's hardware number3R0907115FOffset in the file: 0x06A908
Software / calibration3R0907115F · version 0030Offset in the file: 0x06A914
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EF22
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5EL_M14C10/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S06011 and software number 1037509850. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat ExeoFlash2,048.00 KB€15Add to cart
Seat ExeoFlash2,048.00 KB€15Add to cart
Seat Exeo 2.0 TSIFlash4,096.00 KB€15Add to cart

All reads of 0261S06011 / 1037509850

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
0261S059761037509261
0261S059761037513994Audi A3
0261S059771037511680Volkswagen Golf, Volkswagen Golf6 GTI
0261S060111037507264Seat Exeo
0261S060111037516949Seat Exeo, Seat Exeo ST
0261S061851037512858Volkswagen Touran
0261S061861037514570Volkswagen Touran
0261S063381037525904Volkswagen Passat

Bosch MED17.1 original files

The Bosch MED17.1 unit page