Original file

Volkswagen pcmflash Bosch MED17.1 03C906021F / 1037517019

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Volkswagen pcmflash, hardware number 03C906021F and software number 1037517019, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflashpetrol
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03C906021F
Software number
1037517019
Bosch part / software
0261S06186
Vehicle maker's hardware number
03C907309L

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Enginepetrol
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number03C906021F
Software number1037517019
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key49e307957df1c0c1
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software0261S06186 / 1037517019Offset in the file: 0x065C64 / 0x08001A
Vehicle maker's hardware number03C907309LOffset in the file: 0x065C7A
Software / calibration03C906021F · version 9146Offset in the file: 0x065C86
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EEFA
Bosch project identifier (EPK)44/1/MED17//MED17.1//D171X3AL_M14I83/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03C906021F and software number 1037517019. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
03C906021E1037527868Volkswagen pcmflash
03C906021E1037535533Volkswagen pcmflash
03C906021E1037539335Volkswagen pcmflash
03C906021F1037512857Volkswagen pcmflash
03C906021F1037527866Volkswagen pcmflash
03C906021F1037535534Volkswagen pcmflash
03C906021F1037539325Volkswagen pcmflash
03C906021F2173133416Volkswagen pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page