Original file

Volkswagen Transporter Bosch MED17.1 06J906021AB / 06J906021AB

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Volkswagen Transporter, hardware number 06J906021AB and software number 06J906021AB, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 petrol · 204.0PS / 150.0kW
Control unit
Bosch MED17.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
06J906021AB
Software number
06J906021AB
Bosch part / software
10SW001089
Vehicle maker's hardware number
06J907309C

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 petrol
Power204.0PS / 150.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number06J906021AB
Software number06J906021AB
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6830bd642795c9a0
Identification read from the file
ECU nameMED17.1
Read typeCalibration only (data set)
Bosch part / software10SW001089Offset in the file: 0x04001A
Vehicle maker's hardware number06J907309COffset in the file: 0x06DA1C
Software / calibration06J906021AB · version 1673Offset in the file: 0x06DA36
Bosch project identifier (EPK)50/1/MED17/3/MED17.1//D171XV00C000_NY16H01/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06J906021AB and software number 06J906021AB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
06E906023AG1037549137Porsche Cayenne
06J9060211037507902Volkswagen pcmflash
06J906021AA1037525654Volkswagen Transporter
06J906021AA1037539276Volkswagen Transporter
06J906021AB06J907309CVolkswagen Transporter
06J906021AB1037515730Volkswagen Transporter 2.0 TSI 4Motion 7AT - 204hp, Volkswagen Transporter
06J906021AB10SW001089Volkswagen Transporter
06J906021AC005873Volkswagen Transporter T6 2.0 TFSI

Bosch MED17.1 original files

The Bosch MED17.1 unit page