Original file

Volkswagen Transporter Bosch MED17.1 06J906021AC / 06J907309C

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Volkswagen Transporter, hardware number 06J906021AC and software number 06J907309C, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 petrol · 150.0PS / 110.3kW
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
06J906021AC
Software number
06J907309C
Bosch part / software
10SW005873

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 petrol
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number06J906021AC
Software number06J907309C
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycd42af21308bc6b7
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW005873Offset in the file: 0x08001A
Vehicle maker's hardware number06J907309COffset in the file: 0x06DA1C
Software / calibration06J906021AC · version 2032Offset in the file: 0x06DA36
Internal build stringMED17 CB.02.01.02Offset in the file: 0x00DF66
Bosch project identifier (EPK)50/1/MED17/3/MED17.1//D171XV00C000_NY16H01/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06J906021AC and software number 06J907309C. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart

All reads of 06J906021AC / 06J907309C

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
06J906021AB1037515730Volkswagen Transporter 2.0 TSI 4Motion 7AT - 204hp, Volkswagen Transporter
06J906021AB10SW001089Volkswagen Transporter
06J906021AC005873Volkswagen Transporter T6 2.0 TFSI
06J906021AC06J906021ACVolkswagen Transporter, Volkswagen pcmflash
06J906021AC10SW005873Volkswagen pcmflash
06J906021AE1037546695Volkswagen Transporter
06J906021AE1037548772Volkswagen Transporter, Volkswagen pcmflash
06J906021AF004365Volkswagen Transporter / Multivan 2.0TSI

Bosch MED17.1 original files

The Bosch MED17.1 unit page