Original file

Seat pcmflash Bosch MED17.1 3R0907115F / 1037516949

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Seat pcmflash, hardware number 3R0907115F and software number 1037516949, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat pcmflash2.0 petrol 210PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
3R0907115F
Software number
1037516949
Bosch part / software
0261S06011

Technical data

Vehicle
BrandSeat
Car modelpcmflash
Engine2.0 petrol 210PS
Power210.7PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number3R0907115F
Software number1037516949
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyaeeb6fe3f6080322
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software0261S06011 / 1037516949Offset in the file: 0x06A8F2 / 0x08001A
Vehicle maker's hardware number3R0907115FOffset in the file: 0x06A908
Software / calibration3R0907115F · version 0050Offset in the file: 0x06A914
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EF22
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5EL_M14C10/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3R0907115F and software number 1037516949. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
06J907309C1037539269Volkswagen Transporter, Volkswagen Multivan
1K0907115AQ1037513992Volkswagen pcmflash
1K0907115ATVolkswagen Golf
1K0907115AT1037555449Volkswagen pcmflash
3R0907115J1037520933Seat pcmflash
4G09071151037517860Audi pcmflash
4G09071151037533989Audi pcmflash, Audi A4 2.0TFSI
4G09071158K2907115LAudi pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page