Original file

Audi pcmflash Bosch MED17.1 4G0907115F / 10SW016866

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi pcmflash, hardware number 4G0907115F and software number 10SW016866, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 petrol · 210.8PS / 155.0kW
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
4G0907115F
Software number
10SW016866
Vehicle maker's hardware number
8K2907115L

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 petrol
Power210.8PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number4G0907115F
Software number10SW016866
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2a857430c74d3856
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW016866Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115LOffset in the file: 0x078A9C
Software / calibration4G0907115F · version 0005Offset in the file: 0x078AB6
Bosch project identifier (EPK)50/1/MED17/5/MED17.1//D171XA07C000_MY13P25/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907115F and software number 10SW016866. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
4G09071158K2907115LAudi pcmflash
4G0907115BAudi A6
4G0907115F1037525169Audi pcmflash
4G0907115F1037533826Audi pcmflash
4G0907115H1037533827Audi pcmflash
4G0907115H10SW016867Audi pcmflash
4G0907115L1037517860Audi A6 2.0TFSI
4G0907115L10SW016283Audi pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page