Original file

Audi pcmflash Bosch MED17.1 4G0907115L / 10SW016283

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi pcmflash, hardware number 4G0907115L and software number 10SW016283, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 petrol 179PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
4G0907115L
Software number
10SW016283
Vehicle maker's hardware number
8K2907115L

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 petrol 179PS
Power179.5PS / 132.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number4G0907115L
Software number10SW016283
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8f54cc4d212b8d15
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW016283Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115LOffset in the file: 0x076848
Software / calibration4G0907115L · version 0002Offset in the file: 0x076862
Bosch project identifier (EPK)50/1/MED17/5/MED17.1//D171XA07C000_MY12M30/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907115L and software number 10SW016283. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
4G0907115F10SW016866Audi pcmflash
4G0907115H1037533827Audi pcmflash
4G0907115H10SW016867Audi pcmflash
4G0907115L1037517860Audi A6 2.0TFSI
4G0907115N1037551284Volkswagen pcmflash
4G0907115N10SW009222Volkswagen pcmflash
4G0907115N10SW016538Volkswagen pcmflash
4G0907115P1037551285Volkswagen pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page