Original file

Audi R8 Bosch MED17.1 4T0907552A / 10SW010096

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi R8, hardware number 4T0907552A and software number 10SW010096, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi R85.2 petrol 549PS
Control unit
Bosch MED17.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
4T0907552A
Software number
10SW010096
Software / calibration
4S0907552K

Technical data

Vehicle
BrandAudi
Car modelR8
Engine5.2 petrol 549PS
Power549.3PS / 404.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number4T0907552A
Software number10SW010096
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc8b91785048bf56a
Identification read from the file
ECU nameMED17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW010096Offset in the file: 0x02001A
Vehicle maker's hardware number4T0907552AOffset in the file: 0x3CA306
Software / calibration4S0907552K · version 0003Offset in the file: 0x3CA320
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8A6
Bosch project identifier (EPK)41/1/MED17/5///D1711A11A000_MY16B9_010///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4T0907552A and software number 10SW010096. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
4G0907115P10SW016537Volkswagen pcmflash
4H0906014014036Audi RS6 4.0 TFSI V8
4H2907551D6576615301Audi
4T0907552A10SW003904Lamborghini HURACAN, Lamborghini HURACAN ECU2
5WP25007AA1501042205Volkswagen Multivan
8K2907115AAudi Tfsi
8K2907115AA013289Audi A5 2.0 TFSI, Audi A4 2.0 TFSI
8K2907115AA1037501788Audi A5, Audi A4 2.0 TFSI, Audi 2.0 TFSI

Bosch MED17.1 original files

The Bosch MED17.1 unit page