Original file

Audi Q5 2.0 TFSI Bosch MED17.1 8K2907115D / 013320

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi Q5 2.0 TFSI, hardware number 8K2907115D and software number 013320, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0 TFSI2.0 petrol 210.7PS / 155.0kW
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115D
Software number
013320
Bosch part / software
10SW013320
Software / calibration
8R0907115H

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0 TFSI
Engine2.0 petrol 210.7PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115D
Software number013320
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2dfece93826afae9
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW013320Offset in the file: 0x04001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06B772
Software / calibration8R0907115H · version 0004Offset in the file: 0x06B78C
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5DL_M14I23/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115D and software number 013320. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115AK1037514909Audi A4
8K2907115AL1037515424Audi A5, Audi A4, Audi A4 2.0 TFSI (211) Quattro -
8K2907115AL10SW013315Audi pcmflash, Audi A4
8K2907115AM1037516591Audi A4 2.0 TFSI
8K2907115D1037397259Audi A4 2.0 TFSI, Audi A5, Audi A4
8K2907115D1037397281Audi A4, Audi A4 2.0 TSI/TFSI, Audi A4 USA Stage1ell 2009
8K2907115D1037397306Audi A4
8K2907115D1037398177Audi A4, Audi A4 2.0 TFSI, Audi A5 2.0 TFSI

Bosch MED17.1 original files

The Bosch MED17.1 unit page