Original file

Audi A4 Bosch MED17.1 8K2907115D / 1037501785

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi A4, hardware number 8K2907115D and software number 1037501785, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 petrol
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115D
Software number
1037501785
Software / calibration
8K2907115T

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 petrol
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115D
Software number1037501785
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 2.0 TFSI
File keyc8b926ee5c3bf647
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software1037501785Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06A0E2
Software / calibration8K2907115T · version 0001Offset in the file: 0x06A110
Internal build stringMED17 CB.02.06.01Offset in the file: 0x00F728
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5DL_M14F32/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115D and software number 1037501785. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115D1037399298Audi Q5
8K2907115D1037400626Audi A4, Audi A4 2.0 TFSI, Audi A4 2.0 TSI/TFSI
8K2907115D1037400655Audi A4 2.0 TSI/TFSI, Audi A5 2.0 TFSI, Audi A4
8K2907115D1037500889Audi A5, Audi A4 2.0 TFSI, Audi A5 2.0 TFSI
8K2907115D1037502121Audi Q5, Audi A4 2.0TFSI
8K2907115D1037502137Audi A4 2.0TFSI
8K2907115D1037502768Audi A5, Audi A4 2.0 TFSI
8K2907115D1037502880Audi A5 2.0 TFSI, Audi A4 2.0 TFSI, Audi A5

Bosch MED17.1 original files

The Bosch MED17.1 unit page