Original file

Audi A4 Bosch MED17.1 8K2907115D / 1037512813

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi A4, hardware number 8K2907115D and software number 1037512813, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 petrol
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115D
Software number
1037512813
Software / calibration
8K2907115T

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 petrol
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115D
Software number1037512813
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 2.0 TFSI
File key7cb2cc03893ed6e4
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software1037512813Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06AA4E
Software / calibration8K2907115T · version 0006Offset in the file: 0x06AA7C
Internal build stringMED17 CB.02.06.01Offset in the file: 0x00F768
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5DL_M14F42/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115D and software number 1037512813. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115D1037512380Audi Q5 2.0 TSI/TFSI, Audi A4 2.0TFSI
8K2907115D1037512381Audi A4 2.0TFSI
8K2907115D1037512391Audi A4 2.0L
8K2907115D1037512804Audi A4
8K2907115D1037512926Audi Q5, Audi A4 2.0TFSI
8K2907115D1037512930Audi A4
8K2907115D1037512975Audi A4 2.0TFSI
8K2907115D1037514910Audi A4 2.0L, Audi A5 2011 Turbo Benzin

Bosch MED17.1 original files

The Bosch MED17.1 unit page