Original file

Audi Q5 Bosch MED17.1 8K2907115D / 1037521803

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi Q5, hardware number 8K2907115D and software number 1037521803, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q52.0 petrol 210PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115D
Software number
1037521803
Software / calibration
8R0907115T

Technical data

Vehicle
BrandAudi
Car modelQ5
Engine2.0 petrol 210PS
Power210.7PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115D
Software number1037521803
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye4ec560be861267c
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
ProcessorTC1796
Bosch part / software1037521803Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06ABF2
Software / calibration8R0907115T · version 0001Offset in the file: 0x06AC0C
Internal build stringMED17 CB.02.06.01Offset in the file: 0x00F768
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5CL_M14F43/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115D and software number 1037521803. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q5 2.0TFSIFlash2,048.00 KB€15Add to cart
Audi Q5Flash2,048.00 KB€15Add to cart
Audi Q5 2.0 TFSIFlash2,048.00 KB€15Add to cart

All reads of 8K2907115D / 1037521803

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115D1037515352Audi Q5, Audi Q5 2.0 TFSI, Audi A6 2.0 TFSI
8K2907115D1037515356Audi Q5 2.0 TSI/TFSI, Audi Q5, Audi Q5 2.0TFSI
8K2907115D1037516591Audi A4
8K2907115D1037516960Audi Q5, Audi Q5 2.0, Audi 2.0 TFSI
8K2907115D1037526510Audi 2.0 TFSI, Audi A4 2.0TFSI
8K2907115D10SW013289Audi A4 2.0L
8K2907115D10SW013320Audi A4 2.0TFSI
8K2907115D10SW013324Audi Q5 2.0TFSI

Bosch MED17.1 original files

The Bosch MED17.1 unit page