Original file

Audi Bosch MED17.1 8K2907115D / 1037526510

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi, hardware number 8K2907115D and software number 1037526510, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi2.0 petrol 210PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115D
Software number
1037526510
Software / calibration
8R0907115P

Technical data

Vehicle
BrandAudi
Engine2.0 petrol 210PS
Power210.8PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115D
Software number1037526510
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key16432c60722b6667
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
ProcessorTC1796
Bosch part / software1037526510Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06B9C2
Software / calibration8R0907115P · version 0003Offset in the file: 0x06B9DC
Internal build stringMED17 CB.02.09.00Offset in the file: 0x00F834
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5DL_M14M10/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115D and software number 1037526510. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4 2.0TFSIFlash2,048.00 KB€15Add to cart
Audi 2.0 TFSIFlash2,048.00 KB€15Add to cart

All reads of 8K2907115D / 1037526510

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115D1037515356Audi Q5 2.0 TSI/TFSI, Audi Q5, Audi Q5 2.0TFSI
8K2907115D1037516591Audi A4
8K2907115D1037516960Audi Q5, Audi Q5 2.0, Audi 2.0 TFSI
8K2907115D1037521803Audi Q5, Audi Q5 2.0 TFSI, Audi Q5 2.0TFSI
8K2907115D10SW013289Audi A4 2.0L
8K2907115D10SW013320Audi A4 2.0TFSI
8K2907115D10SW013324Audi Q5 2.0TFSI
8K2907115F1037505554Audi pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page