Original file

Audi Q5 2.0TFSI Bosch MED17.1 8K2907115D / 10SW013324

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi Q5 2.0TFSI, hardware number 8K2907115D and software number 10SW013324, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0TFSI2.0 petrol 210PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115D
Software number
10SW013324
Software / calibration
8R0907115P

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0TFSI
Engine2.0 petrol 210PS
Power210.8PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115D
Software number10SW013324
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6c3822b446b8a89a
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW013324Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06B9C2
Software / calibration8R0907115P · version 0004Offset in the file: 0x06B9DC
Internal build stringMED17 CB.02.09.00Offset in the file: 0x00F834
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5DL_M14M10/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115D and software number 10SW013324. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115D1037521803Audi Q5, Audi Q5 2.0 TFSI, Audi Q5 2.0TFSI
8K2907115D1037526510Audi 2.0 TFSI, Audi A4 2.0TFSI
8K2907115D10SW013289Audi A4 2.0L
8K2907115D10SW013320Audi A4 2.0TFSI
8K2907115F1037505554Audi pcmflash
8K2907115F1037512804Audi pcmflash
8K2907115J1037505651Audi pcmflash
8K2907115J1037512930Audi pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page