Original file

Audi A4 Bosch MED17.1 8K2907115L / 1037525685

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi A4, hardware number 8K2907115L and software number 1037525685, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 petrol 179PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K2907115L
Software number
1037525685
Bosch part / software
10SW017266
Software / calibration
8K5907115A

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 petrol 179PS
Power179.5PS / 132.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115L
Software number1037525685
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2d68abfe94546f2d
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
ProcessorTC1796
Bosch part / software10SW017266Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115LOffset in the file: 0x077F04
Software / calibration8K5907115A · version 0005Offset in the file: 0x077F1E
Internal build stringMED17 CB.06.02.00Offset in the file: 0x00E45E
Bosch project identifier (EPK)50/1/MED17/5/MED17.1//D171XA07C000_MY13O20/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115L and software number 1037525685. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A4Flash2,048.00 KB€15Add to cart
Audi A4Flash2,048.00 KB€15Add to cart
MAN MANFlash2,048.00 KB€15Add to cart
Audi A4 2.0 TFSIFlash2,048.00 KB€15Add to cart
Audi A4 2.0 TFSIFlash2,048.00 KB€15Add to cart

All reads of 8K2907115L / 1037525685

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115L1037523012Audi A4 2.0TFSI
8K2907115L1037525168Audi A6
8K2907115L1037525169Audi A4 2.0TFSI
8K2907115L1037525674Audi A5, Audi A4, Audi A4 2.0 TFSI
8K2907115L1037527717Audi A5, Audi A4 2.0TFSI, Audi A4
8K2907115L1037533077Audi Q5 2.0 TSI/TFSI
8K2907115L1037533300Audi Q5
8K2907115L1037533302Audi A4

Bosch MED17.1 original files

The Bosch MED17.1 unit page