Original file

Audi A5 2008 Turbo Benzin Bosch MED17.1 8K2907115P / 1037500889

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi A5 2008 Turbo Benzin, hardware number 8K2907115P and software number 1037500889, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A5 2008 Turbo Benzin2.0 petrol · 211.0PS / 155.2kW
Control unit
Bosch MED17.1
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
8K2907115P
Software number
1037500889
Vehicle maker's hardware number
8K2907115D

Technical data

Vehicle
BrandAudi
Car modelA5 2008 Turbo Benzin
Engine2.0 petrol
Power211.0PS / 155.2kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K2907115P
Software number1037500889
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A5 2.0 TFSI 2008
File key48f29bf596f7e48f
Identification read from the file
ECU nameMED17.1
Read typeCalibration only (data set)
Bosch part / software1037500889Offset in the file: 0x04001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06AEDE
Software / calibration8K2907115P · version 0005Offset in the file: 0x06AF0C
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X52L_M08J27/Dst00//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K2907115P and software number 1037500889. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115L8K5907115CAudi A4
8K2907115L8K5907115PAudi A4
8K2907115L8R1907115GAudi Q5
8K2907115L8R1907115NAudi Q5
8K2907115P1037502768Audi pcmflash
8K2907115P1037504551Audi pcmflash
8K2907115P1037505611Audi A5 2.0TSI 2009 Turbo, Audi pcmflash
8K2907115P1037512278Audi pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page