Original file

Audi pcmflash Bosch MED17.1 8K5907115 / 8K2907115L

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi pcmflash, hardware number 8K5907115 and software number 8K2907115L, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflashpetrol
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8K5907115
Software number
8K2907115L
Bosch part / software
10SW014360

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Enginepetrol
Displacement2.0
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8K5907115
Software number8K2907115L
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye76511776d4830d7
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW014360Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115LOffset in the file: 0x07672C
Software / calibration8K5907115 · version 0008Offset in the file: 0x076746
Bosch project identifier (EPK)50/1/MED17/5/MED17.1//D171XA07C000_MY12N20/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8K5907115 and software number 8K2907115L. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8K2907115T1037505656Audi pcmflash
8K2907115T1037512813Audi pcmflash
8K59071151037525674Audi pcmflash
8K59071151037535940Audi pcmflash
8K5907115A1037017266Audi A4 2.0TFSI
8K5907115A10SW017266Audi pcmflash
8K5907115C1037525608Audi pcmflash, Audi A4 2.0TFSI
8K5907115C1037533828Audi pcmflash, Audi A4 2.0TFSI

Bosch MED17.1 original files

The Bosch MED17.1 unit page