Original file

Audi pcmflash Bosch MED17.1 8R0907115H / 10SW013320

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi pcmflash, hardware number 8R0907115H and software number 10SW013320, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 petrol 210PS
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8R0907115H
Software number
10SW013320
Vehicle maker's hardware number
8K2907115D

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 petrol 210PS
Power210.8PS / 155.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8R0907115H
Software number10SW013320
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key83ff9a8e7928458c
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW013320Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115DOffset in the file: 0x06B772
Software / calibration8R0907115H · version 0004Offset in the file: 0x06B78C
Bosch project identifier (EPK)45/1/MED17/5/MED17.1//D171X5DL_M14I23/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8R0907115H and software number 10SW013320. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8R0907115D1037502137Audi pcmflash
8R0907115D1037505654Audi pcmflash
8R0907115D1037512926Audi pcmflash
8R0907115H1037512381Audi pcmflash
8R0907115J1037513914Audi pcmflash
8R0907115K1037512866Audi pcmflash
8R0907115P10SW013324Audi pcmflash
8R0907115Q1037511752Audi pcmflash

Bosch MED17.1 original files

The Bosch MED17.1 unit page