Original file

Audi pcmflash Bosch MED17.1 8R1907115N / 10SW016629

An original (stock) flash read of the Bosch MED17.1 control unit, fitted in Audi pcmflash, hardware number 8R1907115N and software number 10SW016629, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 petrol · 220.3PS / 162.0kW
Control unit
Bosch MED17.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8R1907115N
Software number
10SW016629
Vehicle maker's hardware number
8K2907115L

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 petrol
Power220.3PS / 162.0kW
Control unit
Control unitBosch MED17.1
ECU makerBosch
Hardware number8R1907115N
Software number10SW016629
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key287c697a26edf4e2
Identification read from the file
ECU nameMED17.1
Read typeFull read (boot area included)
Bosch part / software10SW016629Offset in the file: 0x08001A
Vehicle maker's hardware number8K2907115LOffset in the file: 0x07B894
Software / calibration8R1907115N · version 0003Offset in the file: 0x07B8AE
Bosch project identifier (EPK)50/1/MED17/5/MED17.1//D171XA07C000_MY15T23/Dst00//Offset in the file: 0x07FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8R1907115N and software number 10SW016629. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1

HardwareSoftwareVehicles
8R1907115L10SW008271Audi pcmflash
8R1907115L10SW016127Audi pcmflash
8R1907115N1037553027Audi pcmflash
8R1907115N10SW008933Audi pcmflash
970618516091037533994Porsche Panamera
970618576031037518476Volkswagen Touareg
970618578051037521414Volkswagen pcmflash
991618657091037550002Porsche 991 GT3

Bosch MED17.1 original files

The Bosch MED17.1 unit page