Original file

Ford F150 Bosch MED17.2.2 BL31-12B684-AC / 1037516982

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford F150, hardware number BL31-12B684-AC and software number 1037516982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F1503.5 petrol 370PS
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
BL31-12B684-AC
Software number
1037516982
Vehicle maker's hardware number
BL3A-12A650-AYC

Technical data

Vehicle
BrandFord
Car modelF150
Engine3.5 petrol 370PS
Power370.0PS / 272.0kW
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberBL31-12B684-AC
Software number1037516982
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc55908ac7ca23c9d
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037516982Offset in the file: 0x00401A
Vehicle maker's hardware numberBL3A-12A650-AYCOffset in the file: 0x00FC30
Software / calibrationBL31-12B684-ACOffset in the file: 0x00FC00
Engine descriptionBL3A-14C204-AYGOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG504_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_000_0620/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BL31-12B684-AC and software number 1037516982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.2.2

HardwareSoftwareVehicles
456678966445568899Ford Edge
7099271681037565863Ford Focus 3 RS Damos, Ford Mustang, Ford Focus
7099271681847570246Ford Focus RS
9744ZZZXTLHFDDDG170_400_0827Ford F150
CL3A-12B684-AA1037523146Ford F150
CV6A-12B684-CAFord Transit Connect, Ford Focus, Ford Kuga/Escape
CV6A-12B684-CA1037526506Ford Escape
CV6A-12B684-CA1037531183Ford Kuga

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page