Original file

Ford Transit Bosch MED17.2.2 CV6A-12B684-CA / 1037545420

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Transit, hardware number CV6A-12B684-CA and software number 1037545420, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit1.6 petrol 150PS
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
CV6A-12B684-CA
Software number
1037545420
Vehicle maker's hardware number
DV61-12A650-BUC

Technical data

Vehicle
BrandFord
Car modelTransit
Engine1.6 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberCV6A-12B684-CA
Software number1037545420
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybc75d329c97e6b1e
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037545420Offset in the file: 0x00401A
Vehicle maker's hardware numberDV61-12A650-BUCOffset in the file: 0x00FC30
Software / calibrationCV6A-12B684-CAOffset in the file: 0x00FC00
Engine descriptionDV61-14C204-BUCOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG505_2Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_002_0631/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV6A-12B684-CA and software number 1037545420. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.2.2

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page