Original file
Ford Kuga Bosch MED17.2.2 CV6A-12B684-CA / 1037547679
An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Kuga, hardware number CV6A-12B684-CA and software number 1037547679, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Kuga2.0 · 240.0PS / 176.5kW
- Control unit
- Bosch MED17.2.2
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- CV6A-12B684-CA
- Software number
- 1037547679
- Vehicle maker's hardware number
- DV61-12A650-BZB
Technical data
| Brand | Ford |
|---|---|
| Car model | Kuga |
| Engine | 2.0 |
| Fuel | Petrol |
| Power | 240.0PS / 176.5kW |
| Control unit | Bosch MED17.2.2 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CV6A-12B684-CA |
| Software number | 1037547679 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 8bde18e5c2dae433 |
| ECU name | MED17.2.2 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037547679 | Offset in the file: 0x00401A |
| Vehicle maker's hardware number | DV61-12A650-BZB | Offset in the file: 0x00FC30 |
| Software / calibration | CV6A-12B684-CA | Offset in the file: 0x00FC00 |
| Engine description | DV61-14C204-BZB | Offset in the file: 0x3FFC4F |
| Internal build string | MED170_PBL_97_T3_DG505_2 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 53/1/MED17/22/CYCLONE_MEDG170//DG170_001_0631/Dst00// | Offset in the file: 0x13FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CV6A-12B684-CA and software number 1037547679. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.2.2
| Hardware | Software | Vehicles |
|---|---|---|
| CV6A-12B684-CA | 1037537084 | Ford Kuga |
| CV6A-12B684-CA | 1037538227 | Ford Kuga |
| CV6A-12B684-CA | 1037538270 | Ford Mondeo |
| CV6A-12B684-CA | 1037545420 | Ford Transit |
| DA8A-12B684-AA | 1037532079 | Ford Explorer |
| DG170_401_0827 | Ford S-Max | |
| DG170_563_0824 | Ford Mondeo 2.0T | |
| DG1A-12B684-AB | Ford Mondeo, Ford Fusion |