Original file

Ford Mondeo Bosch MED17.2.2 DG1A-12B684-AB / 1037534226

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Mondeo, hardware number DG1A-12B684-AB and software number 1037534226, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo2.0 · 240.0PS / 176.5kW
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
DG1A-12B684-AB
Software number
1037534226
Vehicle maker's hardware number
DS7A-12A650-AYC

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine2.0
FuelPetrol
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberDG1A-12B684-AB
Software number1037534226
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5e69ea6414df0c75
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037534226Offset in the file: 0x00401A
Vehicle maker's hardware numberDS7A-12A650-AYCOffset in the file: 0x00FC30
Software / calibrationDG1A-12B684-ABOffset in the file: 0x00FC00
Engine descriptionDS7A-14C204-AYDOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_301_0801/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DG1A-12B684-AB and software number 1037534226. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford MondeoFlash4,096.00 KB€15Add to cart

All reads of DG1A-12B684-AB / 1037534226

Other pairs of Bosch MED17.2.2

HardwareSoftwareVehicles
DG170_563_0824Ford Mondeo 2.0T
DG1A-12B684-ABFord Mondeo, Ford Fusion
DG1A-12B684-AB1037511018Ford Mondeo
DG1A-12B684-AB1037528998Ford Fusion
DG1A-12B684-AB1037534227Ford Mondeo
DG1A-12B684-AB1037535954Ford Fusion
DG1A-12B684-AB1037538024Ford Fusion
DG1A-12B684-AB1037538069Ford Mondeo

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page