Original file

Ford Mondeo Bosch MED17.2.2 DG1A-12B684-AB / GS7A-14C204-AGC

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Mondeo, hardware number DG1A-12B684-AB and software number GS7A-14C204-AGC, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo2.0 200PS
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
DG1A-12B684-AB
Software number
GS7A-14C204-AGC
Bosch part / software
10SW018567
Vehicle maker's hardware number
GS7A-12A650-AGC

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine2.0 200PS
FuelPetrol
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberDG1A-12B684-AB
Software numberGS7A-14C204-AGC
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc4dd2f4b4617c0e8
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW018567Offset in the file: 0x00401A
Vehicle maker's hardware numberGS7A-12A650-AGCOffset in the file: 0x00FC30
Software / calibrationDG1A-12B684-ABOffset in the file: 0x00FC00
Engine descriptionGS7A-14C204-AGCOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_563_0824/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DG1A-12B684-AB and software number GS7A-14C204-AGC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.2.2

HardwareSoftwareVehicles
DG1A-12B684-AB1037538069Ford Mondeo
DG1A-12B684-AB1037549373Ford Mondeo
DG1A-12B684-AB1037549374Ford Mondeo
DG1A-12B684-AB10SW004572Ford Ticket
DJ5A-14C204-AFC1037536426Ford Escape EcoBoost 237 BHP
DL3A-12B684-UAFord F150
DL3A-14C558-AAFord Focus
DS7A-12A650-THFord Fusion

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page