Original file
Ford Mondeo Bosch MED17.2.2 DS7A-12B684-DA / 1037549314
An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Mondeo, hardware number DS7A-12B684-DA and software number 1037549314, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Mondeo1.5 · 160.0PS / 117.7kW
- Control unit
- Bosch MED17.2.2
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- DS7A-12B684-DA
- Software number
- 1037549314
- Vehicle maker's hardware number
- FS7A-12A650-BUE
Technical data
| Brand | Ford |
|---|---|
| Car model | Mondeo |
| Engine | 1.5 |
| Fuel | Petrol |
| Power | 160.0PS / 117.7kW |
| Control unit | Bosch MED17.2.2 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DS7A-12B684-DA |
| Software number | 1037549314 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 452d6e151058fbc0 |
| ECU name | MED17.2.2 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037549314 | Offset in the file: 0x00401A |
| Vehicle maker's hardware number | FS7A-12A650-BUE | Offset in the file: 0x00FC30 |
| Software / calibration | DS7A-12B684-DA | Offset in the file: 0x00FC00 |
| Engine description | FS7A-14C204-BUF | Offset in the file: 0x3FFC4F |
| Internal build string | MED170_PBL_97_T3_DG506_1 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 53/1/MED17/22/CYCLONE_MEDG170//DG170_006_0823/Dst00// | Offset in the file: 0x13FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DS7A-12B684-DA and software number 1037549314. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.2.2
| Hardware | Software | Vehicles |
|---|---|---|
| DS7A-12A650-TH | Ford Fusion | |
| DS7A-12B684-DA | Ford Mondeo | |
| DS7A-12B684-DA | 1037535447 | Ford Mondeo |
| DS7A-12B684-DA | 1037543869 | Ford Mondeo |
| DS7A-12B684-DA | 10SW007106 | Ford |
| DS7A-12B684-DA | GS7A-12A650-AJA | Ford Mondeo BR PERFORMANCE |
| DV4A-14C204-LC | GHBQ6LC.H32 | Ford Kuga |
| DV61-12A650-AXE | Ford Kuga/Escape |