Original file

Ford Focus ST Bosch MED17.2.2 F1EA-12B684-CA / 10SW011635

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Focus ST, hardware number F1EA-12B684-CA and software number 10SW011635, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus ST2.0 petrol 250PS
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
F1EA-12B684-CA
Software number
10SW011635
Vehicle maker's hardware number
HM5A-12A650-VA

Technical data

Vehicle
BrandFord
Car modelFocus ST
Engine2.0 petrol 250PS
Power250.0PS / 183.9kW
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberF1EA-12B684-CA
Software number10SW011635
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyba5fec48fd8017f8
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW011635Offset in the file: 0x00401A
Vehicle maker's hardware numberHM5A-12A650-VAOffset in the file: 0x00FC30
Software / calibrationF1EA-12B684-CAOffset in the file: 0x00FC00
Engine descriptionHM5A-14C204-VAOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_508_0830/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1EA-12B684-CA and software number 10SW011635. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.2.2

HardwareSoftwareVehicles
F1EA-12B684-CA10SW001181Ford Focus ST, Ford Focus
F1EA-12B684-CA10SW008221Ford Focus
F1EA-12B684-CA10SW008222Ford Focus RS
F1EA-12B684-CA10SW008861Ford Focus, Ford Focus ST
F1EA-12B684-CA10SW014642Ford Focus RS KORBEL !!, Ford Focus
F1EA-12B684-CA10SW017801Ford
F1EA-12B684-CA10SW022636Ford Focus
F1GA-12B684-EAFord S-Max

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page