Original file
Ford Mustang Bosch MED17.2.2 FR3A-12B684-EA / GR3A-12A650-ZB
An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Mustang, hardware number FR3A-12B684-EA and software number GR3A-12A650-ZB, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Mustang2.3 · 314.0PS / 230.9kW
- Control unit
- Bosch MED17.2.2
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- FR3A-12B684-EA
- Software number
- GR3A-12A650-ZB
- Bosch part / software
- 10SW001006
Technical data
| Brand | Ford |
|---|---|
| Car model | Mustang |
| Engine | 2.3 |
| Fuel | Petrol |
| Power | 314.0PS / 230.9kW |
| Control unit | Bosch MED17.2.2 |
|---|---|
| ECU maker | Bosch |
| Hardware number | FR3A-12B684-EA |
| Software number | GR3A-12A650-ZB |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | e45cf3e23dbafd8a |
| ECU name | MED17.2.2 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW001006 | Offset in the file: 0x00401A |
| Vehicle maker's hardware number | GR3A-12A650-ZB | Offset in the file: 0x00FC30 |
| Software / calibration | FR3A-12B684-EA | Offset in the file: 0x00FC00 |
| Engine description | GR3A-14C204-ZB | Offset in the file: 0x3FFC4F |
| Internal build string | MED170_PBL_97_T3_DG506_1 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 53/1/MED17/22/CYCLONE_MEDG170//DG170_501_0828/Dst00// | Offset in the file: 0x13FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number FR3A-12B684-EA and software number GR3A-12A650-ZB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.2.2
| Hardware | Software | Vehicles |
|---|---|---|
| FR3A-12B684-EA | 10SW004805 | Ford Mustang |
| FR3A-12B684-EA | 10SW004806 | Ford Mustang |
| FR3A-12B684-EA | 10SW004807 | Ford Mustang |
| FR3A-12B684-EA | GR3A-12A650-BMA | Ford Mustang |
| FR3A-12B684-EA | HR3A-14C204-DD | Ford Mustang |
| FR3A-12B684-EA | HR3A-14C204-DE | Ford Mustang |
| FR3A-14C204-DZD | DG170_501_0828 | Ford Mustang |
| G1FA-14C204-CM | 998762359IHGFCBBC | Ford Focus RS |