Original file

Ford Mondeo Bosch MED17.2.2 GS7A-12B684-AA / HS7A-14C204-CUA

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Mondeo, hardware number GS7A-12B684-AA and software number HS7A-14C204-CUA, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo1.5 · 180.8PS / 133.0kW
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
GS7A-12B684-AA
Software number
HS7A-14C204-CUA
Bosch part / software
10SW008448
Vehicle maker's hardware number
HS7A-12A650-BEA

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine1.5
FuelPetrol
Power180.8PS / 133.0kW
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberGS7A-12B684-AA
Software numberHS7A-14C204-CUA
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc483dc40d0110351
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW008448Offset in the file: 0x00401A
Vehicle maker's hardware numberHS7A-12A650-BEAOffset in the file: 0x00FC30
Software / calibrationGS7A-12B684-AAOffset in the file: 0x00FC00
Engine descriptionHS7A-14C204-CUAOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_606_0840/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GS7A-12B684-AA and software number HS7A-14C204-CUA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.2.2

HardwareSoftwareVehicles
GR3A-12A650-BMAFord Mustang
GR3A-12A650-YBFord Mustang
GS7A-12A650-AFAFord Mondeo
GS7A-12B684-AA10SW009095Ford
H1FA-12A650-UAFord Focus RS
H1FA-12A650-UA10SW011796Ford Focus RS MK3
H1FA-14C204-UC1605106975Ford Focus
HA6A-12A640-LAFord Fiesta

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page