Original file
Ford Tourneo Bosch MED17.2.2 HK2A-12B684-AA / HK21-14C204-AG
An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford Tourneo, hardware number HK2A-12B684-AA and software number HK21-14C204-AG, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Tourneo2.0 204PS
- Control unit
- Bosch MED17.2.2
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- HK2A-12B684-AA
- Software number
- HK21-14C204-AG
- Bosch part / software
- 10SW018080
- Vehicle maker's hardware number
- HK21-12A650-AG
Technical data
| Brand | Ford |
|---|---|
| Car model | Tourneo |
| Engine | 2.0 204PS |
| Fuel | Petrol |
| Control unit | Bosch MED17.2.2 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HK2A-12B684-AA |
| Software number | HK21-14C204-AG |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 458e292a7aff0f69 |
| ECU name | MED17.2.2 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW018080 | Offset in the file: 0x00401A |
| Vehicle maker's hardware number | HK21-12A650-AG | Offset in the file: 0x00FC30 |
| Software / calibration | HK2A-12B684-AA | Offset in the file: 0x00FC00 |
| Engine description | HK21-14C204-AG | Offset in the file: 0x3FFC4F |
| Internal build string | MED170_PBL_97_T3_DG506_1 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 53/1/MED17/22/CYCLONE_MEDG170//DG170_407_0860/Dst00// | Offset in the file: 0x13FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HK2A-12B684-AA and software number HK21-14C204-AG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.2.2
| Hardware | Software | Vehicles |
|---|---|---|
| H1FA-12A650-UA | 10SW011796 | Ford Focus RS MK3 |
| H1FA-14C204-UC | 1605106975 | Ford Focus |
| HA6A-12A640-LA | Ford Fiesta | |
| HA6A-12B684-ZA | Ford Focus | |
| HL7A-14C204-AA | Lincoln Navigator | |
| HR3A-14C204-BE | 10SW004805 | Ford Mustang 2017y Ecoboost |
| HS74-12A650-BEA | Ford Mondeo | |
| HS7A-12A650-ABB | Ford Fusion |